Can You Push Start a Motorcycle with a Dead Battery?

There comes a time in every biker’s life when they find themselves with a dead battery. What do you do when your motorcycle won’t start and you’re stranded on the side of the road? You could call a tow truck, but that can be expensive.

Or, you could try to push start your bike. It might seem like an impossible task, but it can be done! In this blog post, we will teach you how to push start a motorcycle with a dead battery.

How do you Push Start a Bike With a Dead Battery?

If your bike has a dead battery, you’ll need to push start it. Here’s how:

  • Find a flat surface to start on. You’ll need enough room to pedal the bike and get it up to speed.
  • Put the bike in first gear.
  • Turn off the engine.
  • Push the bike until it’s going fast enough to sustain itself, then hop on and kickstart the engine.

And that’s it! Just be sure to give yourself plenty of room to build up speed before attempting to start the engine, or you might damage your starter motor. Safe riding!

Plan Ahead Before you Bump Start your Bike

When you’re ready to bump-start your bike, make sure you have everything you need before you begin. You’ll need a friend to help you, and two working motorcycles.

If possible, find a flat stretch of ground to work on. Make sure both bikes are in neutral, and that the kill switch is off on both bikes. Have your friend sit on one of the bikes, and put your bike in first gear.

Have your friend hold onto their bike while you push yours until it’s moving fast enough to start on its own. As you’re pushing, keep an eye on the tachometer.

When it reaches around 4 RPM, you can let go of the bike and it should start on its own. If it doesn’t, try again.

Be careful not to over-rev the engine, or you could damage it. If all goes well, you should be able to bump-start your bike and be on your way.

Can you Push Start a Fuel Injected Motorcycle?

The answer is yes, you can push start a fuel-injected motorcycle. However, there are a few things you need to keep in mind before you do.

First, make sure that the motorcycle is in neutral and the side stand is up. If not, the bike could start in gear and lurch forward, which could cause serious injury.

Second, locate the start button on the motorcycle. It is usually located on the right handlebar near the throttle. Once you have found the start button, push and hold it in for a few seconds. The motorcycle should startup. If it doesn’t, try again.

Make sure you are holding the start button in for a few seconds before you release it. If the motorcycle still doesn’t start, it could be out of fuel, the battery could be dead, or there could be another issue.

In this case, you will need to take the motorcycle to a mechanic to have it checked out.

An old man try to push start a motorcycle that have dead battery.

How do you Start a Motorcycle Without a Starter?

There are a few ways to start a motorcycle without a starter.

One way is to push start the motorcycle. This can be done by either pushing the motorcycle up an incline or by getting a running start and then popping the clutch.

Another way to start a motorcycle without a starter is to use a bump start method. This is done by finding a hill and rolling the motorcycle down the hill, then popping the clutch when you reach the bottom.

Finally, you can also start a motorcycle without a starter by using a jump start method. This is done by attaching jumper cables to another vehicle and using that vehicle’s battery to start the motorcycle.

Whichever method you choose, make sure you have a good understanding of how to do it before attempting it. Otherwise, you could damage your motorcycle or injure yourself.

More Related Information You Have to Know

Is push start bad for bike?

The answer to this question is a little more complicated than a simple yes or no. While it may not be ideal to push start your bike on a regular basis, it is not necessarily harmful to do so occasionally.

There are a few things to keep in mind if you push-starting can damage your bike’s starter motor. On the other hand, if done correctly, push-starting really isn’t all that bad for your bike.

Is it possible to bump start a modern motorcycle?

It is possible to bump start a motorcycle with a few modifications. However, it is not recommended as it can damage the engine. Bump starting a motorcycle is best left to professionals. If you are not comfortable with doing it, please take your bike to a mechanic.

Do you hold the clutch in when starting a motorcycle?

The answer is yes, you should always hold the clutch in when starting a motorcycle. This helps to prevent the engine from stalling and makes it easier to find the correct gear.

When you’re ready to move off, simply release the clutch slowly and gently apply some throttle. Remember to keep the clutch engaged whenever you’re changing gears.

Can you bump start a shaft drive motorcycle?

The answer is yes, you can bump start a shaft drive motorcycle. However, there are a few things you need to keep in mind before you do.

First, make sure that the battery is charged. If it’s not, you won’t be able to start the motorcycle.
Second, make sure the clutch is disengaged before you try to start the motorcycle. Otherwise, you could damage the clutch.

Finally, make sure you have enough room to ride the motorcycle before you try to start it. Bump starting a shaft drive motorcycle is not difficult, but it does require a little bit of care and preparation.

If you follow these simple steps, you’ll be able to bump start your shaft drive motorcycle with no problem.

How does bump starting a motorcycle work?

If your motorcycle has a kickstand, put it up. You don’t want the bike to fall over while you’re trying to start it. Next, find a flat stretch of ground where you can get a good run-up. Line the motorcycle up so that it’s pointing in the direction you want to go.

Now it’s time for the actual bump to start. First, make sure that the gearshift is neutral. Then, put your right foot on the rear brake pedal and your left foot on the ground.

Push down on the rear brake pedal while you simultaneously push the motorcycle forward. Once it’s moving, quickly jump on and kick the starter button with your right hand. The engine should turn over and start.

If it doesn’t start on the first try, don’t worry. Just keep trying and it should eventually catch. And that’s all there is to bump starting a motorcycle!

Just remember to stay safe and have fun.

Why won’t a motorcycle start but the battery is good?

There are a few reasons this could be happening. If the motorcycle has been sitting for a while, the battery may just need to be recharged. Another possibility is that there is something wrong with the electrical system, preventing the battery from starting the engine.

If you’re not sure what’s causing the problem, it’s best to take the motorcycle to a mechanic to have it checked out. They will be able to diagnose the issue and get your bike up and running again in no time.

What happens if you jumpstart a motorcycle with a dead battery?

If you jumpstart a motorcycle with a dead battery, the motorcycle will not start. The battery will need to be replaced. Jumpstarting a motorcycle with a dead battery can damage the motorcycle’s electrical system.

Always consult a professional mechanic before jump starting a motorcycle with a dead battery.

Conclusion

If your motorcycle battery is dead and you don’t have a jumper box or access to a power outlet, you can try to push start the motorcycle. This method requires another person to help push the motorcycle while you start it.

It’s important to know how to do this properly so you don’t damage your motorcycle. If done correctly, push starting a motorcycle with a dead battery is a quick and easy way to get your motorcycle running again.

Leave a Comment