How to Revive a Dead Motorcycle Battery: 9 Easy Steps

If you’re like most motorcycle riders, you probably take your battery for granted. You charge it up when you first get it and then forget about it until you need it. Unfortunately, this can lead to problems down the road. Batteries die all the time, and if you’re not prepared for it, you’ll be stranded on the side of the road.

In this blog post, we will teach you how to revive a dead motorcycle battery using 9 easy steps!

Why do Batteries Die?

Batteries die for a variety of reasons. The most common reason is simply that they’ve been used too much and need to be replaced. Other reasons include leaving your motorcycle parked for too long without starting it, or riding in cold weather.

Whatever the reason, if your battery is dead, you’ll need to revive it before you can ride again.

Revive a dead motorcycle battery

What are the Symptoms of a Dying Battery?

The most common symptom of a dying battery is that your motorcycle won’t start. Other symptoms include dim headlights, slow cranking, and electrical issues. If you notice any of these symptoms, it’s time to revive your battery!

How to Revive a Dead Motorcycle Battery using Nine Easy Steps!

Step One: Check the Battery

The first step is to check the battery itself. Look for any cracks or leaks. If the battery case is cracked, it’s time to replace the battery.

Step Two: Check the Terminals

Next, check the terminals for corrosion. If they’re corroded, you’ll need to clean them before proceeding.

Step Three: Charge the Battery

If the battery is low on charge, you’ll need to charge it up before proceeding. You can do this with a standard battery charger, or by jump starting the motorcycle from another vehicle.

Step Four: Test the Battery

Once the battery is charged, it’s time to test it. This can be done with a multimeter, or by taking it to a local auto parts store.

Step Five: Replace the Battery

If the battery is indeed dead, it’s time to replace it. You can do this yourself, or take it to a local motorcycle dealer or mechanic.

Step Six: Check the Alternator

Once you’ve replaced the battery, it’s important to check the alternator. This is what charges the battery while you’re riding, and if it’s not working properly, your new battery will quickly die.

Step Seven: Check for Parasitic Draws

Another common cause of batteries dying is parasitic draws. This is when electrical devices are drawing power from the battery even when they’re turned off. The most common offenders are aftermarket stereo systems and GPS units. If you suspect a parasitic draw, you can test for it with a multimeter.

Step Eight: Check the Charging System

If your motorcycle’s charging system isn’t working properly, it won’t be able to charge the battery correctly. This can be caused by a number of different things, so it’s best to take it to a mechanic or dealer to have it checked out.

Step Nine: Enjoy the Ride!

Once you’ve taken all of these steps, your motorcycle should be back up and running and you can enjoy the ride! Just remember to keep an eye on the battery, and if any of the symptoms come back, repeat the steps until they’re gone for good. Thanks for reading! We hope this was helpful!

Pros:

  1. You don’t have to be stranded on the side of the road!
  2. It’s easy to do yourself, and you can save money by not having to take it to a mechanic.
  3. Once you know how, it only takes nine easy steps!

Cons:

  1. You have to keep an eye on the battery, and if any of the symptoms come back, you’ll have to repeat the process.
  2. It’s important to check for parasitic draws, which can be caused by aftermarket stereo systems or GPS units.
  3. You also have to check the charging system to make sure it’s working properly. This can be caused by a number of different things, so it’s best to take it to a mechanic or dealer to have it checked out.

If you’re having battery issues with your motorcycle, we hope this was helpful! Just remember to take all of the necessary steps to avoid being stranded on the side of the road, and you should be good to go!

Warning:

If you’re having battery issues with your motorcycle, it’s important to take all of the necessary steps to avoid being stranded on the side of the road. This includes checking the battery, terminals, and charging system, as well as testing for parasitic draws. If you’re unsure about any of these steps, it’s best to take it to a mechanic or dealer to have it checked out.

Tools Required:

  1. Battery charger
  2. Multimeter
  3. Local auto parts store

Time Required:

The time required will vary depending on the issue, but expect to spend at least a few hours checking everything out.

Difficulty Level:

This will also vary depending on the issue, but overall it’s not too difficult to do yourself. Just be sure to take your time and follow all of the steps carefully. Thanks for reading! We hope this was helpful!

Have you ever had battery issues with your motorcycle? What did you do to fix it? Let us know in the comments below! And as always, happy riding! 🙂

If you enjoyed this article, please feel free to share it with your friends or on social media! Thanks for reading! 🙂

Frequently Asked Questions and Answer

Q: What are some common causes of batteries dying?

A: The most common cause is a parasitic draw, which is when electrical devices are drawing power from the battery even when they’re turned off. Other causes include a charging system that isn’t working properly, or a bad battery.

Q: How can I test for a parasitic draw?

A: The best way to test for a parasitic draw is with a multimeter.

Q: How can I prevent my battery from dying?

A: The best way to prevent your battery from dying is to keep an eye on it and make sure it’s regularly charged. You should also avoid leaving electrical devices turned on when they’re not in use, as this can cause a parasitic draw.

Q: What should I do if my battery dies?

A: If your battery dies, the first thing you should do is check the terminals and charging system. If everything looks good, then you can try charging the battery. If that doesn’t work, then you’ll need to replace it. Thanks for reading! We hope this was helpful!

Q: Do I need to take my motorcycle to a mechanic if I’m having battery issues?

A: Not necessarily. If you’re comfortable doing it yourself, then you can follow the steps in this article to try and fix the problem.

However, if you’re unsure about anything, it’s always best to take it to a mechanic or dealer to have it checked out. Thanks for reading! We hope this was helpful! 🙂

Q: What are some other common motorcycle maintenance tips?

A: Some other common motorcycle maintenance tips include checking the oil level, chain tension, and tire pressure regularly. You should also clean and lube your chain every few hundred miles, and inspect your brakes before each ride. Thanks for reading! We hope this was helpful! 🙂

Conclusion

We hope you found this article helpful! If you have any further questions, feel free to leave them in the comments below. And as always, happy riding! 🙂

If you enjoyed this article, please feel free to share it with your friends or on social media! Thanks for reading! 🙂
Check out our other articles for more helpful tips and tricks!

Related Articles:

Leave a Comment